Presidio Apartments

Building Site Check in

The survey will take approximately 4 minutes to complete.
We are very happy to welcome you to Presidio Apartments carry out any work and or service.
We ask that you always follow the instructions of the Building Manager or its representative onsite.

Can we take this opportunity to provide you some details of site specific information for the building.
ARRIVAL TO SITE – On each day of work or service you must sign in at the Building Managers office located in carpark basement beside roller door. Keys must be signed out and back in each day between unless alternative arrangement are made.
FIRE / EVACUATION – In the event the building has to be evacuated or when the evacuation tone sounds you must stop work / service immediately and use the nearest marked exit point and proceed to the area deemed safe , in our case the area across the street on Erskineville Road , is our safe muster point
TOILETS -We have a common area toilet in this building which is located on the ground floor next to Lift #3.
These are not to be used for any other reason other than use of the toilet. Strictly no work-related use.
FIRST AID – A basic first aid kit is kept in the Building Managers office located in building “A” ground floor foyer.
PERMITS TO WORK – if a Permit is required for Hot work , Working at heights or Confined spaces Building Management must be notified and paperwork must be completed and signed before work commences.
ISOLATIONS –
These must be notified to Building Management before any work commences and when work is completed.
PARKING – There is very limited Visitors Parking on site, but there is a Loading Zone along Brennan Lane. Please discuss your requirement with Building Management.

"*" indicates required fields

Details

Are you using external lock box keys?*
This field is for validation purposes and should be left unchanged.

Contact Us

customercare@cambridgems.com.au

Mailing Address
PO Box 175
OXENFORD QLD 4210

Business Hours
8:30am - 5:00pm

  • This field is for validation purposes and should be left unchanged.